Update housing and code

--add local timezone --add sunrise/sunset calculation and LED illumination accordingly --remove touch sensor check --change mqtt messages
2025-05-13 19:07:14 +02:00
parent 6435550e29
commit 379b4887c3
47 changed files with 26343 additions and 2850 deletions
@@ -0,0 +1,87 @@
+/*************************************************************
+  analogWrite.ino
+  SparkFun SX1509 I/O Expander Example: pwm output (analogWrite)
+  Jim Lindblom @ SparkFun Electronics
+  Original Creation Date: September 21, 2015
+  https://github.com/sparkfun/SparkFun_SX1509_Arduino_Library
+
+  This example demonstrates the SX1509's analogWrite function.
+  Connect an LED to the SX1509's pin 15 (or any other pin, they
+  can all PWM!). The SX1509 can either sink or source current,
+  just don't forget your limiting resistor!
+
+  Hardware Hookup:
+  SX1509 Breakout ------ Arduino -------- Breadboard
+        GND -------------- GND
+        3V3 -------------- 3.3V
+      SDA ------------ SDA (A4)
+      SCL ------------ SCL (A5)
+      15 -------------------------------- LED+
+                                     LED- -/\/\/\- GND
+                                                330
+
+  Development environment specifics:
+  IDE: Arduino 1.6.5
+  Hardware Platform: Arduino Uno
+  SX1509 Breakout Version: v2.0
+
+  This code is beerware; if you see me (or any other SparkFun
+  employee) at the local, and you've found our code helpful,
+  please buy us a round!
+
+  Distributed as-is; no warranty is given.
+*************************************************************/
+
+#include <Wire.h>           // Include the I2C library (required)
+#include <SparkFunSX1509.h> //Click here for the library: http://librarymanager/All#SparkFun_SX1509
+
+// SX1509 I2C address (set by ADDR1 and ADDR0 (00 by default):
+const byte SX1509_ADDRESS = 0x3E; // SX1509 I2C address
+SX1509 io;                        // Create an SX1509 object to be used throughout
+
+// SX1509 Pin definition:
+const byte SX1509_LED_PIN = 15; // LED to SX1509's pin 15
+
+void setup()
+{
+  Serial.begin(115200);
+  Serial.println("SX1509 Example");
+
+  Wire.begin();
+
+  // Call io.begin(<address>) to initialize the SX1509. If it
+  // successfully communicates, it'll return 1.
+  if (io.begin(SX1509_ADDRESS) == false)
+  {
+    Serial.println("Failed to communicate. Check wiring and address of SX1509.");
+    while (1)
+      ; // If we fail to communicate, loop forever.
+  }
+
+  // Use the pinMode(<pin>, <mode>) function to set our led
+  // pin as an ANALOG_OUTPUT, which is required for PWM output
+  io.pinMode(SX1509_LED_PIN, ANALOG_OUTPUT);
+}
+
+void loop()
+{
+  // Ramp brightness up, from 0-255, delay 2ms in between
+  // analogWrite's
+  for (int brightness = 0; brightness < 256; brightness++)
+  {
+    // Call io.analogWrite(<pin>, <0-255>) to configure the
+    // PWM duty cycle
+    io.analogWrite(SX1509_LED_PIN, brightness);
+    delay(2); // Delay 2 milliseconds
+  }
+  delay(500); // Delay half-a-second
+
+  // Ramp brightness down, from 255-0, delay 2ms in between
+  // analogWrite's
+  for (int brightness = 255; brightness >= 0; brightness--)
+  {
+    io.analogWrite(SX1509_LED_PIN, brightness);
+    delay(2); // Delay 2 milliseconds
+  }
+  delay(500); // Delay half-a-second
+}