Update housing and code

--add local timezone --add sunrise/sunset calculation and LED illumination accordingly --remove touch sensor check --change mqtt messages
2025-05-13 19:07:14 +02:00
parent 6435550e29
commit 379b4887c3
47 changed files with 26343 additions and 2850 deletions
@@ -0,0 +1,74 @@
+/*************************************************************
+digitalWrite.ino
+SparkFun SX1509 I/O Expander Example: digital out (digitalWrite)
+Jim Lindblom @ SparkFun Electronics
+Original Creation Date: September 21, 2015
+https://github.com/sparkfun/SparkFun_SX1509_Arduino_Library
+
+This simple example demonstrates the SX1509's digital output 
+functionality. Attach an LED to SX1509 IO 15, or just look at
+it with a multimeter. We're gonna blink it!
+
+Hardware Hookup:
+	SX1509 Breakout ------ Arduino -------- Breadboard
+	      GND -------------- GND
+	      3V3 -------------- 3.3V
+		  SDA ------------ SDA (A4)
+		  SCL ------------ SCL (A5)
+		  15 -------------------------------- LED+
+		                                 LED- -/\/\/\- GND
+                                                330
+
+Development environment specifics:
+	IDE: Arduino 1.6.5
+	Hardware Platform: Arduino Uno
+	SX1509 Breakout Version: v2.0
+
+This code is beerware; if you see me (or any other SparkFun 
+employee) at the local, and you've found our code helpful, 
+please buy us a round!
+
+Distributed as-is; no warranty is given.
+*************************************************************/
+
+#include <Wire.h>           // Include the I2C library (required)
+#include <SparkFunSX1509.h> //Click here for the library: http://librarymanager/All#SparkFun_SX1509
+
+// SX1509 I2C address (set by ADDR1 and ADDR0 (00 by default):
+const byte SX1509_ADDRESS = 0x3E; // SX1509 I2C address
+SX1509 io;                        // Create an SX1509 object to be used throughout
+
+// SX1509 pin definitions:
+const byte SX1509_LED_PIN = 15; // LED connected to pin 15
+
+void setup()
+{
+  Serial.begin(115200);
+  Serial.println("SX1509 Example");
+
+  Wire.begin();
+
+  // Call io.begin(<address>) to initialize the SX1509. If it
+  // successfully communicates, it'll return 1.
+  if (io.begin(SX1509_ADDRESS) == false)
+  {
+    Serial.println("Failed to communicate. Check wiring and address of SX1509.");
+    while (1)
+      ; // If we fail to communicate, loop forever.
+  }
+
+  // Call io.pinMode(<pin>, <mode>) to set an SX1509 pin as
+  // an output:
+  io.pinMode(SX1509_LED_PIN, OUTPUT);
+}
+
+void loop()
+{
+  // It's blinken time!
+  // Call io.digitalWrite(<pin>, <HIGH | LOW>) to set a SX1509
+  // output pin as either 3.3V or 0V.
+  io.digitalWrite(SX1509_LED_PIN, HIGH);
+  delay(500);                           // Delay half-a-second
+  io.digitalWrite(SX1509_LED_PIN, LOW); // Set the I/O low
+  delay(500);                           // Delay half-a-second
+}