Moirtz Wagner
379b4887c3
--add local timezone --add sunrise/sunset calculation and LED illumination accordingly --remove touch sensor check --change mqtt messages
84 lines
2.8 KiB
C++
84 lines
2.8 KiB
C++
/*************************************************************
|
|
breathe.ino
|
|
SparkFun SX1509 I/O Expander Example: breathe output
|
|
Jim Lindblom @ SparkFun Electronics
|
|
Original Creation Date: September 21, 2015
|
|
https://github.com/sparkfun/SparkFun_SX1509_Arduino_Library
|
|
|
|
This example demonstrates the SX1509's set-it-and-forget-it
|
|
breathe function. The SX1509 will pulse an LED, smoothly
|
|
ramping its brightness up-then-down. We'll set the pin up as
|
|
an ANALOG_OUTPUT, and call io.breathe() all in setup(), then
|
|
watch the LED pulse by itself in loop().
|
|
|
|
Hardware Hookup:
|
|
SX1509 Breakout ------ Arduino -------- Breadboard
|
|
GND -------------- GND
|
|
3V3 -------------- 3.3V
|
|
SDA ------------ SDA (A4)
|
|
SCL ------------ SCL (A5)
|
|
15 --------------------------------- LED+
|
|
LED- -/\/\/\- GND
|
|
330
|
|
|
|
Development environment specifics:
|
|
IDE: Arduino 1.6.5
|
|
Hardware Platform: Arduino Uno
|
|
SX1509 Breakout Version: v2.0
|
|
|
|
This code is beerware; if you see me (or any other SparkFun
|
|
employee) at the local, and you've found our code helpful,
|
|
please buy us a round!
|
|
|
|
Distributed as-is; no warranty is given.
|
|
*************************************************************/
|
|
|
|
#include <Wire.h> // Include the I2C library (required)
|
|
#include <SparkFunSX1509.h> //Click here for the library: http://librarymanager/All#SparkFun_SX1509
|
|
|
|
// SX1509 I2C address (set by ADDR1 and ADDR0 (00 by default):
|
|
const byte SX1509_ADDRESS = 0x3E; // SX1509 I2C address
|
|
SX1509 io; // Create an SX1509 object to be used throughout
|
|
|
|
// SX1509 Pin definition:
|
|
const byte SX1509_LED_PIN = 15; // LED to SX1509's pin 15
|
|
|
|
void setup()
|
|
{
|
|
Serial.begin(115200);
|
|
Serial.println("SX1509 Example");
|
|
|
|
Wire.begin();
|
|
|
|
// Call io.begin(<address>) to initialize the SX1509. If it
|
|
// successfully communicates, it'll return 1.
|
|
if (io.begin(SX1509_ADDRESS) == false)
|
|
{
|
|
Serial.println("Failed to communicate. Check wiring and address of SX1509.");
|
|
while (1)
|
|
; // If we fail to communicate, loop forever.
|
|
}
|
|
|
|
// Use the internal 2MHz oscillator.
|
|
// Set LED clock to 500kHz (2MHz / (2^(3-1)):
|
|
io.clock(INTERNAL_CLOCK_2MHZ, 3);
|
|
|
|
// To breathe an LED, make sure you set it as an
|
|
// ANALOG_OUTPUT, so we can PWM the pin:
|
|
io.pinMode(SX1509_LED_PIN, ANALOG_OUTPUT);
|
|
|
|
// Breathe an LED: 1000ms LOW, 500ms HIGH,
|
|
// 500ms to rise from low to high
|
|
// 250ms to fall from high to low
|
|
io.breathe(SX1509_LED_PIN, 1000, 500, 500, 250);
|
|
// The timing parameters are in milliseconds, but they
|
|
// aren't 100% exact. The library will estimate to try to
|
|
// get them as close as possible. Play with the clock
|
|
// divider to maybe get more accurate timing.
|
|
}
|
|
|
|
void loop()
|
|
{
|
|
// Enjoy your hypnotically breathing LED!
|
|
}
|