282 lines
7.0 KiB
C++
282 lines
7.0 KiB
C++
/**
|
|
*
|
|
* @license MIT License
|
|
*
|
|
* Copyright (c) 2022 lewis he
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
|
* of this software and associated documentation files (the "Software"), to deal
|
|
* in the Software without restriction, including without limitation the rights
|
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
|
* copies of the Software, and to permit persons to whom the Software is
|
|
* furnished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be included in all
|
|
* copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
|
|
* SOFTWARE.
|
|
*
|
|
* @file QMI8658_InterruptExample.ino
|
|
* @author Lewis He (lewishe@outlook.com)
|
|
* @date 2022-11-03
|
|
*
|
|
*/
|
|
#include <Arduino.h>
|
|
#include <Wire.h>
|
|
#include <SPI.h>
|
|
#include "SensorQMI8658.hpp"
|
|
#ifdef ARDUINO_T_BEAM_S3_SUPREME
|
|
#include <XPowersAXP2101.tpp> //PMU Library https://github.com/lewisxhe/XPowersLib.git
|
|
#endif
|
|
|
|
|
|
// #define USE_I2C //Using the I2C interface
|
|
|
|
#ifdef USE_I2C
|
|
#ifndef SENSOR_SDA
|
|
#define SENSOR_SDA 17
|
|
#endif
|
|
|
|
#ifndef SENSOR_SCL
|
|
#define SENSOR_SCL 18
|
|
#endif
|
|
|
|
#else /*SPI interface*/
|
|
|
|
#ifndef SPI_MOSI
|
|
#define SPI_MOSI (35)
|
|
#endif
|
|
|
|
#ifndef SPI_SCK
|
|
#define SPI_SCK (36)
|
|
#endif
|
|
|
|
#ifndef SPI_MISO
|
|
#define SPI_MISO (37)
|
|
#endif
|
|
|
|
#endif /*USE_I2C*/
|
|
|
|
#ifndef IMU_CS
|
|
#define IMU_CS 34 // IMU CS PIN
|
|
#endif
|
|
|
|
#ifndef IMU_IRQ
|
|
#define IMU_IRQ 33 // IMU INT PIN
|
|
#endif
|
|
|
|
#ifndef OLED_SDA
|
|
#define OLED_SDA 22 // Display Wire SDA Pin
|
|
#endif
|
|
|
|
#ifndef OLED_SCL
|
|
#define OLED_SCL 21 // Display Wire SCL Pin
|
|
#endif
|
|
|
|
// #define IMU_IRQ2 -1 //QMI IRQ NUM2
|
|
|
|
SensorQMI8658 qmi;
|
|
|
|
IMUdata acc;
|
|
IMUdata gyr;
|
|
|
|
void beginPower()
|
|
{
|
|
// T_BEAM_S3_SUPREME The PMU voltage needs to be turned on to use the sensor
|
|
#if defined(ARDUINO_T_BEAM_S3_SUPREME)
|
|
XPowersAXP2101 power;
|
|
power.begin(Wire1, AXP2101_SLAVE_ADDRESS, 42, 41);
|
|
power.disableALDO1();
|
|
power.disableALDO2();
|
|
delay(250);
|
|
power.setALDO1Voltage(3300); power.enableALDO1();
|
|
power.setALDO2Voltage(3300); power.enableALDO2();
|
|
#endif
|
|
}
|
|
|
|
void setup()
|
|
{
|
|
Serial.begin(115200);
|
|
while (!Serial);
|
|
|
|
beginPower();
|
|
|
|
bool ret = false;
|
|
#ifdef USE_I2C
|
|
ret = qmi.begin(Wire, QMI8658_L_SLAVE_ADDRESS, SENSOR_SDA, SENSOR_SCL);
|
|
#else
|
|
#if defined(SPI_MOSI) && defined(SPI_SCK) && defined(SPI_MISO)
|
|
ret = qmi.begin(SPI, IMU_CS, SPI_MOSI, SPI_MISO, SPI_SCK);
|
|
#else
|
|
ret = qmi.begin(SPI, IMU_CS);
|
|
#endif
|
|
#endif
|
|
|
|
if (!ret) {
|
|
Serial.println("Failed to find QMI8658 - check your wiring!");
|
|
while (1) {
|
|
delay(1000);
|
|
}
|
|
}
|
|
|
|
/* Get chip id*/
|
|
Serial.print("Device ID:");
|
|
Serial.println(qmi.getChipID(), HEX);
|
|
|
|
qmi.configAccelerometer(
|
|
/*
|
|
* ACC_RANGE_2G
|
|
* ACC_RANGE_4G
|
|
* ACC_RANGE_8G
|
|
* ACC_RANGE_16G
|
|
* */
|
|
SensorQMI8658::ACC_RANGE_4G,
|
|
/*
|
|
* ACC_ODR_1000H
|
|
* ACC_ODR_500Hz
|
|
* ACC_ODR_250Hz
|
|
* ACC_ODR_125Hz
|
|
* ACC_ODR_62_5Hz
|
|
* ACC_ODR_31_25Hz
|
|
* ACC_ODR_LOWPOWER_128Hz
|
|
* ACC_ODR_LOWPOWER_21Hz
|
|
* ACC_ODR_LOWPOWER_11Hz
|
|
* ACC_ODR_LOWPOWER_3H
|
|
* */
|
|
SensorQMI8658::ACC_ODR_1000Hz,
|
|
/*
|
|
* LPF_MODE_0 //2.66% of ODR
|
|
* LPF_MODE_1 //3.63% of ODR
|
|
* LPF_MODE_2 //5.39% of ODR
|
|
* LPF_MODE_3 //13.37% of ODR
|
|
* LPF_OFF // OFF Low-Pass Fitter
|
|
* */
|
|
SensorQMI8658::LPF_MODE_0);
|
|
|
|
|
|
qmi.configGyroscope(
|
|
/*
|
|
* GYR_RANGE_16DPS
|
|
* GYR_RANGE_32DPS
|
|
* GYR_RANGE_64DPS
|
|
* GYR_RANGE_128DPS
|
|
* GYR_RANGE_256DPS
|
|
* GYR_RANGE_512DPS
|
|
* GYR_RANGE_1024DPS
|
|
* */
|
|
SensorQMI8658::GYR_RANGE_64DPS,
|
|
/*
|
|
* GYR_ODR_7174_4Hz
|
|
* GYR_ODR_3587_2Hz
|
|
* GYR_ODR_1793_6Hz
|
|
* GYR_ODR_896_8Hz
|
|
* GYR_ODR_448_4Hz
|
|
* GYR_ODR_224_2Hz
|
|
* GYR_ODR_112_1Hz
|
|
* GYR_ODR_56_05Hz
|
|
* GYR_ODR_28_025H
|
|
* */
|
|
SensorQMI8658::GYR_ODR_896_8Hz,
|
|
/*
|
|
* LPF_MODE_0 //2.66% of ODR
|
|
* LPF_MODE_1 //3.63% of ODR
|
|
* LPF_MODE_2 //5.39% of ODR
|
|
* LPF_MODE_3 //13.37% of ODR
|
|
* LPF_OFF // OFF Low-Pass Fitter
|
|
* */
|
|
SensorQMI8658::LPF_MODE_3);
|
|
|
|
|
|
/*
|
|
* If both the accelerometer and gyroscope sensors are turned on at the same time,
|
|
* the output frequency will be based on the gyroscope output frequency.
|
|
* The example configuration is 896.8HZ output frequency,
|
|
* so the acceleration output frequency is also limited to 896.8HZ
|
|
* */
|
|
qmi.enableGyroscope();
|
|
qmi.enableAccelerometer();
|
|
|
|
|
|
pinMode(IMU_IRQ, INPUT);
|
|
|
|
#ifdef IMU_IRQ2
|
|
pinMode(IMU_IRQ2, INPUT);
|
|
#endif
|
|
// qmi.enableINT(SensorQMI8658::INTERRUPT_PIN_1); //no use
|
|
// Enable data ready to interrupt pin2
|
|
qmi.enableINT(SensorQMI8658::INTERRUPT_PIN_2);
|
|
qmi.enableDataReadyINT();
|
|
|
|
// Print register configuration information
|
|
qmi.dumpCtrlRegister();
|
|
|
|
Serial.println("Read data now...");
|
|
}
|
|
|
|
void readSensorData(const char *name)
|
|
{
|
|
uint8_t status = qmi.getIrqStatus();
|
|
// status == 0x01
|
|
// If syncSmpl (CTRL7.bit7) = 1:
|
|
// 0: Sensor Data is not available
|
|
// 1: Sensor Data is available for reading
|
|
// If syncSmpl = 0, this bit shows the same value of INT2 level
|
|
Serial.print(name);
|
|
Serial.print(" -> [");
|
|
Serial.print(millis());
|
|
Serial.print("]: -<HEX> ");
|
|
Serial.print(status);
|
|
Serial.print(" -<BIN> ");
|
|
Serial.println(status, BIN);
|
|
if (status & 0x01) {
|
|
if (qmi.getAccelerometer(acc.x, acc.y, acc.z)) {
|
|
Serial.print("{ACCEL: ");
|
|
Serial.print(acc.x);
|
|
Serial.print(",");
|
|
Serial.print(acc.y);
|
|
Serial.print(",");
|
|
Serial.print(acc.z);
|
|
Serial.println("}");
|
|
}
|
|
|
|
if (qmi.getGyroscope(gyr.x, gyr.y, gyr.z)) {
|
|
Serial.print("{GYRO: ");
|
|
Serial.print(gyr.x);
|
|
Serial.print(",");
|
|
Serial.print(gyr.y );
|
|
Serial.print(",");
|
|
Serial.print(gyr.z);
|
|
Serial.println("}");
|
|
}
|
|
Serial.print("\t\t\t\t > ");
|
|
Serial.print(qmi.getTimestamp());
|
|
Serial.print(" ");
|
|
Serial.print(qmi.getTemperature_C());
|
|
Serial.println("*C");
|
|
}
|
|
|
|
}
|
|
|
|
void loop()
|
|
{
|
|
if (digitalRead(IMU_IRQ) == HIGH) {
|
|
readSensorData("INT1");
|
|
}
|
|
|
|
#ifdef IMU_IRQ2
|
|
if (digitalRead(IMU_IRQ2) == HIGH) {
|
|
readSensorData("INT2");
|
|
}
|
|
#endif
|
|
}
|
|
|
|
|
|
|
|
|