SolarManager unter Versionsverwaltung
Erster Stand der Hintergrundprozesse, die auf der Synology unter /volume1/homes/wagner/SolarManager laufen: der Manager selbst, die Sammler je Geraet, die MQTT-Bruecke, der Wecker und - neu hinzugezogen - der AutoAction-Runner, der als Hintergrundprozess hierher gehoert und nicht ins Web-Verzeichnis. Zugangsdaten stehen nicht mehr im Quelltext, sondern in config.ini, die nicht mit eingecheckt wird. Vorlage ist config.ini.example, gelesen wird sie von konfig.py. Betroffen waren solarManager.py (Datenbank und Wattpilot), zeit.py, gatherWaterData.py, wecker.py und skoda_testdaten.py, das sich das Passwort bisher aus dem Quelltext eines anderen Moduls herausgesucht hat. Die Kia-Anbindung ist mit dem Fahrzeug entfallen: kiaTest.py, gatherCarData.py und hyundai_kia_connect_api sind nicht mehr dabei, ebenso gatherInverterData.py, auf das nur noch eine auskommentierte Zeile zeigte. Die mitgelieferten Bibliotheken bleiben im Repository - die NAS hat kein pip, sie muessen neben den Skripten liegen. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
This commit is contained in:
Claude Opus 5
@@ -0,0 +1,899 @@
|
||||
{
|
||||
"group": {
|
||||
"desc": "DER AC controls model.",
|
||||
"groups": [
|
||||
{
|
||||
"comments": [
|
||||
"Power Factor Settings"
|
||||
],
|
||||
"desc": "Power factor setpoint when injecting active power.",
|
||||
"label": "Power Factor (W Inj) ",
|
||||
"name": "PFWInj",
|
||||
"points": [
|
||||
{
|
||||
"access": "RW",
|
||||
"desc": "Power factor setpoint when injecting active power.",
|
||||
"label": "Power Factor (W Inj) ",
|
||||
"name": "PF",
|
||||
"sf": "PF_SF",
|
||||
"size": 1,
|
||||
"type": "uint16",
|
||||
"standards": [
|
||||
"IEEE 1547-2018"
|
||||
]
|
||||
},
|
||||
{
|
||||
"access": "RW",
|
||||
"desc": "Power factor excitation setpoint when injecting active power.",
|
||||
"label": "Power Factor Excitation (W Inj)",
|
||||
"name": "Ext",
|
||||
"size": 1,
|
||||
"symbols": [
|
||||
{
|
||||
"desc": "Power factor over-excited excitation.",
|
||||
"label": "Over-Excited",
|
||||
"name": "OVER_EXCITED",
|
||||
"value": 0
|
||||
},
|
||||
{
|
||||
"desc": "Power factor under-excited excitation.",
|
||||
"label": "Under-Excited",
|
||||
"name": "UNDER_EXCITED",
|
||||
"value": 1
|
||||
}
|
||||
],
|
||||
"type": "enum16",
|
||||
"standards": [
|
||||
"IEEE 1547-2018"
|
||||
]
|
||||
}
|
||||
],
|
||||
"type": "sync"
|
||||
},
|
||||
{
|
||||
"desc": "Reversion power factor setpoint when injecting active power.",
|
||||
"label": "Reversion Power Factor (W Inj) ",
|
||||
"name": "PFWInjRvrt",
|
||||
"points": [
|
||||
{
|
||||
"access": "RW",
|
||||
"desc": "Reversion power factor setpoint when injecting active power.",
|
||||
"label": "Reversion Power Factor (W Inj) ",
|
||||
"name": "PF",
|
||||
"sf": "PF_SF",
|
||||
"size": 1,
|
||||
"type": "uint16",
|
||||
"standards": []
|
||||
},
|
||||
{
|
||||
"access": "RW",
|
||||
"desc": "Reversion power factor excitation setpoint when injecting active power.",
|
||||
"label": "Reversion PF Excitation (W Inj)",
|
||||
"name": "Ext",
|
||||
"size": 1,
|
||||
"symbols": [
|
||||
{
|
||||
"desc": "Power factor over-excited excitation.",
|
||||
"label": "Over-Excited",
|
||||
"name": "OVER_EXCITED",
|
||||
"value": 0
|
||||
},
|
||||
{
|
||||
"desc": "Power factor under-excited excitation.",
|
||||
"label": "Under-Excited",
|
||||
"name": "UNDER_EXCITED",
|
||||
"value": 1
|
||||
}
|
||||
],
|
||||
"type": "enum16",
|
||||
"standards": []
|
||||
}
|
||||
],
|
||||
"type": "sync"
|
||||
},
|
||||
{
|
||||
"desc": "Power factor setpoint when absorbing active power.",
|
||||
"label": "Power Factor (W Abs) ",
|
||||
"name": "PFWAbs",
|
||||
"points": [
|
||||
{
|
||||
"access": "RW",
|
||||
"desc": "Power factor setpoint when absorbing active power.",
|
||||
"label": "Power Factor (W Abs) ",
|
||||
"name": "PF",
|
||||
"sf": "PF_SF",
|
||||
"size": 1,
|
||||
"type": "uint16",
|
||||
"standards": []
|
||||
},
|
||||
{
|
||||
"access": "RW",
|
||||
"desc": "Power factor excitation setpoint when absorbing active power.",
|
||||
"label": "Power Factor Excitation (W Abs)",
|
||||
"name": "Ext",
|
||||
"size": 1,
|
||||
"symbols": [
|
||||
{
|
||||
"desc": "Power factor over-excited excitation.",
|
||||
"label": "Over-Excited",
|
||||
"name": "OVER_EXCITED",
|
||||
"value": 0
|
||||
},
|
||||
{
|
||||
"desc": "Power factor under-excited excitation.",
|
||||
"label": "Under-Excited",
|
||||
"name": "UNDER_EXCITED",
|
||||
"value": 1
|
||||
}
|
||||
],
|
||||
"type": "enum16",
|
||||
"standards": []
|
||||
}
|
||||
],
|
||||
"type": "sync"
|
||||
},
|
||||
{
|
||||
"desc": "Reversion power factor setpoint when absorbing active power.",
|
||||
"label": "Reversion Power Factor (W Abs) ",
|
||||
"name": "PFWAbsRvrt",
|
||||
"points": [
|
||||
{
|
||||
"access": "RW",
|
||||
"desc": "Reversion power factor setpoint when absorbing active power.",
|
||||
"label": "Reversion Power Factor (W Abs) ",
|
||||
"name": "PF",
|
||||
"sf": "PF_SF",
|
||||
"size": 1,
|
||||
"type": "uint16",
|
||||
"standards": []
|
||||
},
|
||||
{
|
||||
"access": "RW",
|
||||
"desc": "Reversion power factor excitation setpoint when absorbing active power.",
|
||||
"label": "Reversion PF Excitation (W Abs)",
|
||||
"name": "Ext",
|
||||
"size": 1,
|
||||
"symbols": [
|
||||
{
|
||||
"desc": "Power factor over-excited excitation.",
|
||||
"label": "Over-Excited",
|
||||
"name": "OVER_EXCITED",
|
||||
"value": 0
|
||||
},
|
||||
{
|
||||
"desc": "Power factor under-excited excitation.",
|
||||
"label": "Under-Excited",
|
||||
"name": "UNDER_EXCITED",
|
||||
"value": 1
|
||||
}
|
||||
],
|
||||
"type": "enum16",
|
||||
"standards": []
|
||||
}
|
||||
],
|
||||
"type": "sync"
|
||||
}
|
||||
],
|
||||
"label": "DER AC Controls",
|
||||
"name": "DERCtlAC",
|
||||
"points": [
|
||||
{
|
||||
"desc": "DER AC controls model ID.",
|
||||
"label": "Model ID",
|
||||
"mandatory": "M",
|
||||
"name": "ID",
|
||||
"size": 1,
|
||||
"static": "S",
|
||||
"type": "uint16",
|
||||
"value": 704,
|
||||
"standards": [
|
||||
"IEEE 1547-2018"
|
||||
]
|
||||
},
|
||||
{
|
||||
"desc": "DER AC controls model length.",
|
||||
"label": "Model Length",
|
||||
"mandatory": "M",
|
||||
"name": "L",
|
||||
"size": 1,
|
||||
"static": "S",
|
||||
"type": "uint16",
|
||||
"value": 65,
|
||||
"standards": [
|
||||
"IEEE 1547-2018"
|
||||
]
|
||||
},
|
||||
{
|
||||
"access": "RW",
|
||||
"comments": [
|
||||
"Set Power Factor (when injecting active power)"
|
||||
],
|
||||
"desc": "Power factor enable when injecting active power.",
|
||||
"label": "Power Factor Enable (W Inj) Enable",
|
||||
"name": "PFWInjEna",
|
||||
"size": 1,
|
||||
"symbols": [
|
||||
{
|
||||
"desc": "Function is disabled.",
|
||||
"label": "Disabled",
|
||||
"name": "DISABLED",
|
||||
"value": 0
|
||||
},
|
||||
{
|
||||
"desc": "Function is enabled.",
|
||||
"label": "Enabled",
|
||||
"name": "ENABLED",
|
||||
"value": 1
|
||||
}
|
||||
],
|
||||
"type": "enum16",
|
||||
"standards": [
|
||||
"IEEE 1547-2018"
|
||||
]
|
||||
},
|
||||
{
|
||||
"access": "RW",
|
||||
"desc": "Power factor reversion timer when injecting active power enable.",
|
||||
"label": "Power Factor Reversion Enable (W Inj)",
|
||||
"name": "PFWInjEnaRvrt",
|
||||
"size": 1,
|
||||
"symbols": [
|
||||
{
|
||||
"desc": "Function is disabled.",
|
||||
"label": "Disabled",
|
||||
"name": "DISABLED",
|
||||
"value": 0
|
||||
},
|
||||
{
|
||||
"desc": "Function is enabled.",
|
||||
"label": "Enabled",
|
||||
"name": "ENABLED",
|
||||
"value": 1
|
||||
}
|
||||
],
|
||||
"type": "enum16",
|
||||
"standards": []
|
||||
},
|
||||
{
|
||||
"access": "RW",
|
||||
"desc": "Power factor reversion timer when injecting active power.",
|
||||
"label": "PF Reversion Time (W Inj)",
|
||||
"name": "PFWInjRvrtTms",
|
||||
"size": 2,
|
||||
"type": "uint32",
|
||||
"units": "Secs",
|
||||
"standards": []
|
||||
},
|
||||
{
|
||||
"desc": "Power factor reversion time remaining when injecting active power.",
|
||||
"label": "PF Reversion Time Rem (W Inj)",
|
||||
"name": "PFWInjRvrtRem",
|
||||
"size": 2,
|
||||
"type": "uint32",
|
||||
"units": "Secs",
|
||||
"standards": []
|
||||
},
|
||||
{
|
||||
"access": "RW",
|
||||
"comments": [
|
||||
"Set Power Factor (when absorbing active power)"
|
||||
],
|
||||
"desc": "Power factor enable when absorbing active power.",
|
||||
"label": "Power Factor Enable (W Abs) Enable",
|
||||
"name": "PFWAbsEna",
|
||||
"size": 1,
|
||||
"symbols": [
|
||||
{
|
||||
"desc": "Function is disabled.",
|
||||
"label": "Disabled",
|
||||
"name": "DISABLED",
|
||||
"value": 0
|
||||
},
|
||||
{
|
||||
"desc": "Function is enabled.",
|
||||
"label": "Enabled",
|
||||
"name": "ENABLED",
|
||||
"value": 1
|
||||
}
|
||||
],
|
||||
"type": "enum16",
|
||||
"standards": []
|
||||
},
|
||||
{
|
||||
"access": "RW",
|
||||
"desc": "Power factor reversion timer when absorbing active power enable.",
|
||||
"label": "Power Factor Reversion Enable (W Abs)",
|
||||
"name": "PFWAbsEnaRvrt",
|
||||
"size": 1,
|
||||
"symbols": [
|
||||
{
|
||||
"desc": "Function is disabled.",
|
||||
"label": "Disabled",
|
||||
"name": "DISABLED",
|
||||
"value": 0
|
||||
},
|
||||
{
|
||||
"desc": "Function is enabled.",
|
||||
"label": "Enabled",
|
||||
"name": "ENABLED",
|
||||
"value": 1
|
||||
}
|
||||
],
|
||||
"type": "enum16",
|
||||
"standards": []
|
||||
},
|
||||
{
|
||||
"access": "RW",
|
||||
"desc": "Power factor reversion timer when absorbing active power.",
|
||||
"label": "PF Reversion Time (W Abs)",
|
||||
"name": "PFWAbsRvrtTms",
|
||||
"size": 2,
|
||||
"type": "uint32",
|
||||
"units": "Secs",
|
||||
"standards": []
|
||||
},
|
||||
{
|
||||
"desc": "Power factor reversion time remaining when absorbing active power.",
|
||||
"label": "PF Reversion Time Rem (W Abs)",
|
||||
"name": "PFWAbsRvrtRem",
|
||||
"size": 2,
|
||||
"type": "uint32",
|
||||
"units": "Secs",
|
||||
"standards": []
|
||||
},
|
||||
{
|
||||
"access": "RW",
|
||||
"comments": [
|
||||
"Limit Maximum Active Power Generation"
|
||||
],
|
||||
"desc": "Limit maximum active power percent enable.",
|
||||
"label": "Limit Max Power Pct Enable",
|
||||
"name": "WMaxLimPctEna",
|
||||
"size": 1,
|
||||
"symbols": [
|
||||
{
|
||||
"desc": "Function is disabled.",
|
||||
"label": "Disabled",
|
||||
"name": "DISABLED",
|
||||
"value": 0
|
||||
},
|
||||
{
|
||||
"desc": "Function is enabled.",
|
||||
"label": "Enabled",
|
||||
"name": "ENABLED",
|
||||
"value": 1
|
||||
}
|
||||
],
|
||||
"type": "enum16",
|
||||
"standards": [
|
||||
"IEEE 1547-2018"
|
||||
]
|
||||
},
|
||||
{
|
||||
"access": "RW",
|
||||
"desc": "Limit maximum active power percent value.",
|
||||
"label": "Limit Max Power Pct Setpoint",
|
||||
"name": "WMaxLimPct",
|
||||
"sf": "WMaxLimPct_SF",
|
||||
"size": 1,
|
||||
"type": "uint16",
|
||||
"units": "Pct",
|
||||
"standards": [
|
||||
"IEEE 1547-2018"
|
||||
]
|
||||
},
|
||||
{
|
||||
"access": "RW",
|
||||
"desc": "Reversion limit maximum active power percent value.",
|
||||
"label": "Reversion Limit Max Power Pct",
|
||||
"name": "WMaxLimPctRvrt",
|
||||
"sf": "WMaxLimPct_SF",
|
||||
"size": 1,
|
||||
"type": "uint16",
|
||||
"units": "Pct",
|
||||
"standards": []
|
||||
},
|
||||
{
|
||||
"access": "RW",
|
||||
"desc": "Reversion limit maximum active power percent value enable.",
|
||||
"label": "Reversion Limit Max Power Pct Enable",
|
||||
"name": "WMaxLimPctEnaRvrt",
|
||||
"size": 1,
|
||||
"symbols": [
|
||||
{
|
||||
"desc": "Function is disabled.",
|
||||
"label": "Disabled",
|
||||
"name": "DISABLED",
|
||||
"value": 0
|
||||
},
|
||||
{
|
||||
"desc": "Function is enabled.",
|
||||
"label": "Enabled",
|
||||
"name": "ENABLED",
|
||||
"value": 1
|
||||
}
|
||||
],
|
||||
"type": "enum16",
|
||||
"standards": []
|
||||
},
|
||||
{
|
||||
"access": "RW",
|
||||
"desc": "Limit maximum active power percent reversion time.",
|
||||
"label": "Limit Max Power Pct Reversion Time",
|
||||
"name": "WMaxLimPctRvrtTms",
|
||||
"size": 2,
|
||||
"type": "uint32",
|
||||
"units": "Secs",
|
||||
"standards": []
|
||||
},
|
||||
{
|
||||
"desc": "Limit maximum active power percent reversion time remaining.",
|
||||
"label": "Limit Max Power Pct Rev Time Rem",
|
||||
"name": "WMaxLimPctRvrtRem",
|
||||
"size": 2,
|
||||
"type": "uint32",
|
||||
"units": "Secs",
|
||||
"standards": []
|
||||
},
|
||||
{
|
||||
"access": "RW",
|
||||
"comments": [
|
||||
"Set Active Power Level (may be negative for charging)"
|
||||
],
|
||||
"desc": "Set active power enable.",
|
||||
"label": "Set Active Power Enable",
|
||||
"name": "WSetEna",
|
||||
"size": 1,
|
||||
"symbols": [
|
||||
{
|
||||
"desc": "Function is disabled.",
|
||||
"label": "Disabled",
|
||||
"name": "DISABLED",
|
||||
"value": 0
|
||||
},
|
||||
{
|
||||
"desc": "Function is enabled.",
|
||||
"label": "Enabled",
|
||||
"name": "ENABLED",
|
||||
"value": 1
|
||||
}
|
||||
],
|
||||
"type": "enum16",
|
||||
"standards": []
|
||||
},
|
||||
{
|
||||
"access": "RW",
|
||||
"desc": "Set active power mode.",
|
||||
"label": "Set Active Power Mode",
|
||||
"name": "WSetMod",
|
||||
"size": 1,
|
||||
"symbols": [
|
||||
{
|
||||
"desc": "Active power setting is percentage of maximum active power.",
|
||||
"label": "Active Power As Max Percent",
|
||||
"name": "W_MAX_PCT",
|
||||
"value": 0
|
||||
},
|
||||
{
|
||||
"desc": "Active power setting is in watts.",
|
||||
"label": "Active Power As Watts",
|
||||
"name": "WATTS",
|
||||
"value": 1
|
||||
}
|
||||
],
|
||||
"type": "enum16",
|
||||
"standards": []
|
||||
},
|
||||
{
|
||||
"access": "RW",
|
||||
"desc": "Active power setting value in watts.",
|
||||
"label": "Active Power Setpoint (W)",
|
||||
"name": "WSet",
|
||||
"sf": "WSet_SF",
|
||||
"size": 2,
|
||||
"type": "int32",
|
||||
"units": "W",
|
||||
"standards": []
|
||||
},
|
||||
{
|
||||
"access": "RW",
|
||||
"desc": "Reversion active power setting value in watts.",
|
||||
"label": "Reversion Active Power (W)",
|
||||
"name": "WSetRvrt",
|
||||
"sf": "WSet_SF",
|
||||
"size": 2,
|
||||
"type": "int32",
|
||||
"units": "W",
|
||||
"standards": []
|
||||
},
|
||||
{
|
||||
"access": "RW",
|
||||
"desc": "Active power setting value as percent.",
|
||||
"label": "Active Power Setpoint (Pct)",
|
||||
"name": "WSetPct",
|
||||
"sf": "WSetPct_SF",
|
||||
"size": 1,
|
||||
"type": "int16",
|
||||
"units": "Pct",
|
||||
"standards": []
|
||||
},
|
||||
{
|
||||
"access": "RW",
|
||||
"desc": "Reversion active power setting value as percent.",
|
||||
"label": "Reversion Active Power (Pct)",
|
||||
"name": "WSetPctRvrt",
|
||||
"sf": "WSetPct_SF",
|
||||
"size": 1,
|
||||
"type": "int16",
|
||||
"units": "Pct",
|
||||
"standards": []
|
||||
},
|
||||
{
|
||||
"access": "RW",
|
||||
"desc": "Reversion active power function enable.",
|
||||
"label": "Reversion Active Power Enable",
|
||||
"name": "WSetEnaRvrt",
|
||||
"size": 1,
|
||||
"symbols": [
|
||||
{
|
||||
"desc": "Function is disabled.",
|
||||
"label": "Disabled",
|
||||
"name": "DISABLED",
|
||||
"value": 0
|
||||
},
|
||||
{
|
||||
"desc": "Function is enabled.",
|
||||
"label": "Enabled",
|
||||
"name": "ENABLED",
|
||||
"value": 1
|
||||
}
|
||||
],
|
||||
"type": "enum16",
|
||||
"standards": []
|
||||
},
|
||||
{
|
||||
"access": "RW",
|
||||
"desc": "Set active power reversion time.",
|
||||
"label": "Active Power Reversion Time",
|
||||
"name": "WSetRvrtTms",
|
||||
"size": 2,
|
||||
"type": "uint32",
|
||||
"units": "Secs",
|
||||
"standards": []
|
||||
},
|
||||
{
|
||||
"desc": "Set active power reversion time remaining.",
|
||||
"label": "Active Power Rev Time Rem",
|
||||
"name": "WSetRvrtRem",
|
||||
"size": 2,
|
||||
"type": "uint32",
|
||||
"units": "Secs",
|
||||
"standards": []
|
||||
},
|
||||
{
|
||||
"access": "RW",
|
||||
"comments": [
|
||||
"Set Reactive Power Level"
|
||||
],
|
||||
"desc": "Set reactive power enable.",
|
||||
"label": "Set Reactive Power Enable",
|
||||
"name": "VarSetEna",
|
||||
"size": 1,
|
||||
"symbols": [
|
||||
{
|
||||
"desc": "Function is disabled.",
|
||||
"label": "Disabled",
|
||||
"name": "DISABLED",
|
||||
"value": 0
|
||||
},
|
||||
{
|
||||
"desc": "Function is enabled.",
|
||||
"label": "Enabled",
|
||||
"name": "ENABLED",
|
||||
"value": 1
|
||||
}
|
||||
],
|
||||
"type": "enum16",
|
||||
"standards": [
|
||||
"IEEE 1547-2018"
|
||||
]
|
||||
},
|
||||
{
|
||||
"access": "RW",
|
||||
"desc": "Set reactive power mode.",
|
||||
"label": "Set Reactive Power Mode",
|
||||
"name": "VarSetMod",
|
||||
"size": 1,
|
||||
"symbols": [
|
||||
{
|
||||
"desc": "Reactive power setting is percent of maximum active power.",
|
||||
"label": "Reactive Power As Watt Max Pct",
|
||||
"name": "W_MAX_PCT",
|
||||
"value": 0
|
||||
},
|
||||
{
|
||||
"desc": "Reactive power setting is percent of maximum reactive power.",
|
||||
"label": "Reactive Power As Var Max Pct",
|
||||
"name": "VAR_MAX_PCT",
|
||||
"value": 1
|
||||
},
|
||||
{
|
||||
"desc": "Reactive power setting is percent of available reactive power.",
|
||||
"label": "Reactive Power As Var Avail Pct",
|
||||
"name": "VAR_AVAIL_PCT",
|
||||
"value": 2
|
||||
},
|
||||
{
|
||||
"desc": "Reactive power setting is percent of maximum apparent power.",
|
||||
"label": "Reactive Power As VA Max Pct",
|
||||
"name": "VA_MAX_PCT",
|
||||
"value": 3
|
||||
},
|
||||
{
|
||||
"desc": "Reactive power is in vars.",
|
||||
"label": "Reactive Power As Vars",
|
||||
"name": "VARS",
|
||||
"value": 4
|
||||
}
|
||||
],
|
||||
"type": "enum16",
|
||||
"standards": [
|
||||
"IEEE 1547-2018"
|
||||
]
|
||||
},
|
||||
{
|
||||
"access": "RW",
|
||||
"desc": "Reactive power priority.",
|
||||
"label": "Reactive Power Priority",
|
||||
"name": "VarSetPri",
|
||||
"size": 1,
|
||||
"symbols": [
|
||||
{
|
||||
"desc": "Active power priority.",
|
||||
"label": "Active Power Priority",
|
||||
"name": "ACTIVE",
|
||||
"value": 0
|
||||
},
|
||||
{
|
||||
"desc": "Reactive power priority.",
|
||||
"label": "Reactive Power Priority",
|
||||
"name": "REACTIVE",
|
||||
"value": 1
|
||||
},
|
||||
{
|
||||
"desc": "Power priority is vendor specific mode.",
|
||||
"label": "Vendor Power Priority",
|
||||
"name": "VENDOR",
|
||||
"value": 2
|
||||
}
|
||||
],
|
||||
"type": "enum16",
|
||||
"standards": [
|
||||
"IEEE 1547-2018"
|
||||
]
|
||||
},
|
||||
{
|
||||
"access": "RW",
|
||||
"desc": "Reactive power setting value in vars.",
|
||||
"label": "Reactive Power Setpoint (Vars)",
|
||||
"name": "VarSet",
|
||||
"sf": "VarSet_SF",
|
||||
"size": 2,
|
||||
"type": "int32",
|
||||
"units": "Var",
|
||||
"standards": []
|
||||
},
|
||||
{
|
||||
"access": "RW",
|
||||
"desc": "Reversion reactive power setting value in vars.",
|
||||
"label": "Reversion Reactive Power (Vars)",
|
||||
"name": "VarSetRvrt",
|
||||
"sf": "VarSet_SF",
|
||||
"size": 2,
|
||||
"type": "int32",
|
||||
"units": "Var",
|
||||
"standards": []
|
||||
},
|
||||
{
|
||||
"access": "RW",
|
||||
"desc": "Reactive power setting value as percent.",
|
||||
"label": "Reactive Power Setpoint (Pct)",
|
||||
"name": "VarSetPct",
|
||||
"sf": "VarSetPct_SF",
|
||||
"size": 1,
|
||||
"type": "int16",
|
||||
"units": "Pct",
|
||||
"standards": [
|
||||
"IEEE 1547-2018"
|
||||
]
|
||||
},
|
||||
{
|
||||
"access": "RW",
|
||||
"desc": "Reversion reactive power setting value as percent.",
|
||||
"label": "Reversion Reactive Power (Pct)",
|
||||
"name": "VarSetPctRvrt",
|
||||
"sf": "VarSetPct_SF",
|
||||
"size": 1,
|
||||
"type": "int16",
|
||||
"units": "Pct",
|
||||
"standards": []
|
||||
},
|
||||
{
|
||||
"access": "RW",
|
||||
"desc": "Reversion reactive power function enable.",
|
||||
"label": "Reversion Reactive Power Enable",
|
||||
"name": "VarSetEnaRvrt",
|
||||
"size": 1,
|
||||
"symbols": [
|
||||
{
|
||||
"desc": "Function is disabled.",
|
||||
"label": "Disabled",
|
||||
"name": "DISABLED",
|
||||
"value": 0
|
||||
},
|
||||
{
|
||||
"desc": "Function is enabled.",
|
||||
"label": "Enabled",
|
||||
"name": "ENABLED",
|
||||
"value": 1
|
||||
}
|
||||
],
|
||||
"type": "enum16",
|
||||
"standards": []
|
||||
},
|
||||
{
|
||||
"access": "RW",
|
||||
"desc": "Set reactive power reversion time.",
|
||||
"label": "Reactive Power Reversion Time",
|
||||
"name": "VarSetRvrtTms",
|
||||
"size": 2,
|
||||
"type": "uint32",
|
||||
"units": "Secs",
|
||||
"standards": []
|
||||
},
|
||||
{
|
||||
"desc": "Set reactive power reversion time remaining.",
|
||||
"label": "Reactive Power Rev Time Rem",
|
||||
"name": "VarSetRvrtRem",
|
||||
"size": 2,
|
||||
"type": "uint32",
|
||||
"units": "Secs",
|
||||
"standards": []
|
||||
},
|
||||
{
|
||||
"access": "RW",
|
||||
"comments": [
|
||||
"Ramp Rate"
|
||||
],
|
||||
"desc": "Ramp rate for increases in active power during normal generation.",
|
||||
"label": "Normal Ramp Rate",
|
||||
"name": "WRmp",
|
||||
"size": 1,
|
||||
"type": "uint16",
|
||||
"units": "%Max/Sec",
|
||||
"standards": []
|
||||
},
|
||||
{
|
||||
"access": "RW",
|
||||
"desc": "Ramp rate reference unit for increases in active power or current during normal generation.",
|
||||
"label": "Normal Ramp Rate Reference",
|
||||
"name": "WRmpRef",
|
||||
"size": 1,
|
||||
"symbols": [
|
||||
{
|
||||
"desc": "Ramp based on percent of max current per second.",
|
||||
"label": "Max Current Ramp",
|
||||
"name": "A_MAX",
|
||||
"value": 0
|
||||
},
|
||||
{
|
||||
"desc": "Ramp based on percent of max active power per second.",
|
||||
"label": "Max Active Power Ramp",
|
||||
"name": "W_MAX",
|
||||
"value": 1
|
||||
}
|
||||
],
|
||||
"type": "enum16",
|
||||
"standards": []
|
||||
},
|
||||
{
|
||||
"access": "RW",
|
||||
"desc": "Ramp rate based on max reactive power per second.",
|
||||
"label": "Reactive Power Ramp Rate",
|
||||
"name": "VarRmp",
|
||||
"size": 1,
|
||||
"type": "uint16",
|
||||
"units": "%Max/Sec",
|
||||
"standards": []
|
||||
},
|
||||
{
|
||||
"access": "RW",
|
||||
"desc": "Anti-islanding enable.",
|
||||
"label": "Anti-Islanding Enable",
|
||||
"name": "AntiIslEna",
|
||||
"size": 1,
|
||||
"symbols": [
|
||||
{
|
||||
"desc": "Anti-islanding is disabled.",
|
||||
"label": "Disabled",
|
||||
"name": "DISABLED",
|
||||
"value": 0
|
||||
},
|
||||
{
|
||||
"desc": "Anti-islanding is enabled.",
|
||||
"label": "Enabled",
|
||||
"name": "ENABLED",
|
||||
"value": 1
|
||||
}
|
||||
],
|
||||
"type": "enum16",
|
||||
"standards": []
|
||||
},
|
||||
{
|
||||
"comments": [
|
||||
"Scale Factors"
|
||||
],
|
||||
"desc": "Power factor scale factor.",
|
||||
"label": "Power Factor Scale Factor",
|
||||
"name": "PF_SF",
|
||||
"size": 1,
|
||||
"static": "S",
|
||||
"type": "sunssf",
|
||||
"standards": [
|
||||
"IEEE 1547-2018"
|
||||
]
|
||||
},
|
||||
{
|
||||
"desc": "Limit maximum power scale factor.",
|
||||
"label": "Limit Max Power Scale Factor",
|
||||
"name": "WMaxLimPct_SF",
|
||||
"size": 1,
|
||||
"static": "S",
|
||||
"type": "sunssf",
|
||||
"standards": [
|
||||
"IEEE 1547-2018"
|
||||
]
|
||||
},
|
||||
{
|
||||
"desc": "Active power scale factor.",
|
||||
"label": "Active Power Scale Factor",
|
||||
"name": "WSet_SF",
|
||||
"size": 1,
|
||||
"static": "S",
|
||||
"type": "sunssf",
|
||||
"standards": []
|
||||
},
|
||||
{
|
||||
"desc": "Active power pct scale factor.",
|
||||
"label": "Active Power Pct Scale Factor",
|
||||
"name": "WSetPct_SF",
|
||||
"size": 1,
|
||||
"static": "S",
|
||||
"type": "sunssf",
|
||||
"standards": []
|
||||
},
|
||||
{
|
||||
"desc": "Reactive power scale factor.",
|
||||
"label": "Reactive Power Scale Factor",
|
||||
"name": "VarSet_SF",
|
||||
"size": 1,
|
||||
"static": "S",
|
||||
"type": "sunssf",
|
||||
"standards": []
|
||||
},
|
||||
{
|
||||
"desc": "Reactive power pct scale factor.",
|
||||
"label": "Reactive Power Pct Scale Factor",
|
||||
"name": "VarSetPct_SF",
|
||||
"size": 1,
|
||||
"static": "S",
|
||||
"type": "sunssf",
|
||||
"standards": [
|
||||
"IEEE 1547-2018"
|
||||
]
|
||||
}
|
||||
],
|
||||
"type": "group"
|
||||
},
|
||||
"id": 704
|
||||
}
|
||||
Reference in New Issue
Block a user