initial commit

2025-03-21 09:59:09 +01:00
parent 59637f4fa8
commit f690d03c57
355 changed files with 297020 additions and 0 deletions
@@ -0,0 +1,98 @@
+/**
+ *
+ * @license MIT License
+ *
+ * Copyright (c) 2022 lewis he
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ * @file      CM32181_LightSensor.ino
+ * @author    Lewis He (lewishe@outlook.com)
+ * @date      2023-04-14
+ *
+ */
+#include <Wire.h>
+#include <SPI.h>
+#include <Arduino.h>
+#include "SensorCM32181.hpp"
+
+#ifndef SENSOR_SDA
+#define SENSOR_SDA  39
+#endif
+
+#ifndef SENSOR_SCL
+#define SENSOR_SCL  40
+#endif
+
+#ifndef SENSOR_IRQ
+#define SENSOR_IRQ  1
+#endif
+
+SensorCM32181 light;
+
+
+void setup()
+{
+    Serial.begin(115200);
+    while (!Serial);
+
+    pinMode(SENSOR_IRQ, INPUT_PULLUP);
+
+    if (!light.begin(Wire, CM32181_ADDR_PRIMARY, SENSOR_SDA, SENSOR_SCL)) {
+        Serial.println("Failed to find CM32181 - check your wiring!");
+        while (1) {
+            delay(1000);
+        }
+    }
+
+    Serial.println("Init CM32181 Sensor success!");
+
+    int id =  light.getChipID();
+    Serial.print("CM32181 ID = "); Serial.println(id);
+
+    /*
+        Sensitivity mode selection
+            SAMPLING_X1
+            SAMPLING_X2
+            SAMPLING_X1_8
+            SAMPLING_X1_4
+    */
+    light.setSampling(SensorCM32181::SAMPLING_X2);
+
+    //Power On sensor
+    light.powerOn();
+
+}
+
+
+void loop()
+{
+    // Get raw data
+    uint16_t raw = light.getRaw();
+
+    // Get conversion data , The manual does not provide information on how to obtain the
+    //  calibration value, now use the calibration value 0.28 provided by the manual
+    float lux = light.getLux();
+    Serial.print(" RAW:"); Serial.print(raw);
+    Serial.print(" Lux:"); Serial.println(lux);
+    delay(500);
+}
+
+
+