adminandClaude Opus 5
79843aa2ae
Erster Stand der Hintergrundprozesse, die auf der Synology unter /volume1/homes/wagner/SolarManager laufen: der Manager selbst, die Sammler je Geraet, die MQTT-Bruecke, der Wecker und - neu hinzugezogen - der AutoAction-Runner, der als Hintergrundprozess hierher gehoert und nicht ins Web-Verzeichnis. Zugangsdaten stehen nicht mehr im Quelltext, sondern in config.ini, die nicht mit eingecheckt wird. Vorlage ist config.ini.example, gelesen wird sie von konfig.py. Betroffen waren solarManager.py (Datenbank und Wattpilot), zeit.py, gatherWaterData.py, wecker.py und skoda_testdaten.py, das sich das Passwort bisher aus dem Quelltext eines anderen Moduls herausgesucht hat. Die Kia-Anbindung ist mit dem Fahrzeug entfallen: kiaTest.py, gatherCarData.py und hyundai_kia_connect_api sind nicht mehr dabei, ebenso gatherInverterData.py, auf das nur noch eine auskommentierte Zeile zeigte. Die mitgelieferten Bibliotheken bleiben im Repository - die NAS hat kein pip, sie muessen neben den Skripten liegen. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
79 lines
3.6 KiB
Protocol Buffer
79 lines
3.6 KiB
Protocol Buffer
syntax = "proto3";
|
|
|
|
message MeterDataMO {
|
|
int32 device_kind = 1; // Device kind identifier
|
|
int64 meter_sn = 2; // Meter serial number
|
|
int32 meter_total_power = 3; // Total power by the meter (Watts)
|
|
int32 meter_phase_A_power = 4; // Power in phase A (Watts)
|
|
int32 meter_phase_B_power = 5; // Power in phase B (Watts)
|
|
int32 meter_phase_C_power = 6; // Power in phase C (Watts)
|
|
int32 meter_factor = 7; // Meter factor
|
|
int32 meter_total_energy =
|
|
8; // Total energy produced by the meter (Watt-hours)
|
|
int32 meter_phase_A_energy = 9; // Energy produced in phase A (Watt-hours)
|
|
int32 meter_phase_B_energy = 10; // Energy produced in phase B (Watt-hours)
|
|
int32 meter_phase_C_energy = 11; // Energy produced in phase C (Watt-hours)
|
|
int32 meter_total_consumed = 12; // Total energy consumed (Watt-hours)
|
|
int32 meter_phase_A_consumed = 13; // Energy consumed in phase A (Watt-hours)
|
|
int32 meter_phase_B_consumed = 14; // Energy consumed in phase B (Watt-hours)
|
|
int32 meter_phase_C_consumed = 15; // Energy consumed in phase C (Watt-hours)
|
|
int32 meter_fault = 16; // Meter fault code
|
|
}
|
|
|
|
message RpDataMO {
|
|
int64 rp_sn = 1; // RP serial number
|
|
int32 rp_signal = 2; // RP signal strength
|
|
int32 rp_channel = 3; // RP channel number
|
|
int32 rp_link_nub = 4; // RP link number
|
|
int32 rp_link_status = 5; // RP link status
|
|
}
|
|
|
|
message PvDataMO {
|
|
int64 pv_sn = 1; // PV serial number
|
|
int32 pv_port = 2; // PV port number
|
|
int32 pv_vol = 3; // PV voltage (Volts)
|
|
int32 pv_cur = 4; // PV current (Amperes)
|
|
int32 pv_power = 5; // PV power (Watts)
|
|
int32 pv_energy_total = 6; // Total energy generated by PV (Watt-hours)
|
|
int32 grid_vol = 7; // Grid voltage (Volts)
|
|
int32 grid_vol_max = 8; // Maximum grid voltage (Volts)
|
|
int32 grid_freq = 9; // Grid frequency (Hertz)
|
|
int32 grid_p = 10; // Grid active power (Watts)
|
|
int32 grid_q = 11; // Grid reactive power (VAR)
|
|
int32 grid_i = 12; // Grid current (Amperes)
|
|
int32 grid_pf = 13; // Grid power factor
|
|
int32 pv_temp = 14; // PV temperature
|
|
int32 pv_run_status = 15; // PV running status
|
|
int32 pv_fault_num = 16; // PV fault number
|
|
int32 pv_fault_cnt = 17; // PV fault count
|
|
int32 pv_warning_cnt = 18; // PV warning count
|
|
int32 pv_link_status = 19; // PV link status
|
|
int32 pv_send_power = 20; // PV send power (Watts)
|
|
int32 pv_receive_power = 21; // PV received power (Watts)
|
|
int32 pv_time = 22; // PV time
|
|
int32 pv_energy = 23; // PV energy (Watt-hours)
|
|
int32 mi_signal = 24; // Modulation index signal
|
|
}
|
|
|
|
message RealDataReqDTO {
|
|
string dtu_sn = 1; // DTU serial number
|
|
int32 timestamp = 2; // Timestamp of the data
|
|
int32 device_number = 3; // Device number
|
|
int32 pv_number = 4; // PV number
|
|
int32 package_number = 5; // Package number
|
|
int32 current_package = 6; // Current package number
|
|
int32 csq = 7; // Carrier Signal Quality (CSQ)
|
|
repeated MeterDataMO meter_data = 8; // Meter data array
|
|
repeated RpDataMO rp_data = 9; // RpDataMO data array
|
|
repeated PvDataMO pv_data = 10; // PvDataMO data array
|
|
int32 version = 11; // Version number
|
|
}
|
|
|
|
message RealDataResDTO {
|
|
string time_ymd_hms = 1; // Timestamp in the format YMD_HMS
|
|
int32 package_now = 2; // Package now
|
|
int32 error_code = 3; // Error code indicator
|
|
int32 offset = 4; // Offset value
|
|
int32 time = 5; // Timestamp value
|
|
}
|